Bayonet Shaft Winches

B30-F

  • Fixed mount

  • 1-1/2 inch main shaft with a standard 2-7/16 inch bayonet adapter to accept either a bayonet type collapsible reel or capstan.

  • Reversible.

  • No maintenance. All components lubricated by hydraulic oil.

  • 6-3/4 in. wide x 7 in. high (w/o fittings) x 16 in. long.

  • Weight: 68 lbs.

B30-RF

  • Same as B30-F with rotating base.

  • Rotates 360 degrees.

  • 60 positions - locks in 6 degree increments.

  • Can be removed from the base by simply removing the locking pin.

  • 6-3/4 in. wide x 10 in. high (w/o fittings) x 16 in. long

  • Weight: 79 lbs.

  • Requires quick couplings or swivels on hydraulic hoses.

B300-F

  • The B300 has the hydraulic inlet ports relocated to the rear. The angle of the inlet ports can be rotated 90 degrees to either side.

  • The B300 compared to the B30 has different valving on the hydraulic motor. The drift when holding a load is improved slightly with a compromise of a slight decrease in low speed efficiency. Both the B30 and the B300 only brake hydraulically and will drift some when holding a load.

  • The B300 is 6 lbs. heavier and 1 inch longer. Other specifications are the same as the B30.
bayonet capstan

BD Capstan

  • Bayonet capstan

  • Fits B300 / B30 series capstan drives.

  • Recessed areas on capstan designed to increase rope grip without compromising feathering ability or rope wear.

  • Machined aluminum construction.

  • Weight: 8 lb.
______________________________________ ____________________________________________________

B30 / B300 Series Specifications

  • Note: Maximum operating capacity and pressures will vary depending on the type of device used on the bayonet shaft. Offset type capstans that extend beyond the bayonet shaft have less capacity and require lower operating pressure due to leverage on the shaft and bearings. The offset type capstan capacity listed below is based on capstans less than 15 inches in overall length. Consult with ACP for other applicatons.

Maximum operating pressure: 1600 to 2200 psi. (see note).

Maximum line pull with BD capstan: 2000 lb. @ 2200 psi.

Maximum line pull with 7 in. working diameter offset type capstan: 1000 lb. @ 1600 psi.

Tension on 20 in. diameter reel: Approx. 500 lb. @ 2200 psi., 375 lb. @ 1600 psi.

Speed: 50 RPM at 4 GPM, 75 RPM at 6 GPM.

Hydraulic flow: up to 6 GPM.

Capstan rope speed at 6 GPM: 100 ft/min. with BD capstan, 150 ft/min. with 7 in dia. capstan.

  • Capstan line pulls and rope speeds are based on 5/8 dia. rope.

Price list

  • B30-F: $1479.00

  • B30-RF: $1669.00

  • B300-F: $1634.00

  • B300-RF: $1824.00

  • BD capstan: $249.00

  • Quick couplings and dust covers for RF winches: $38.00

  • See winch options for optional counterbalance valves and rope lock (rope lock for BD capstan only).

Home